How to Update and Activate Autocom CDP+ BT with Serial Number 3555
Autocom CDP+ BT is a professional diagnostic tool for cars, trucks and commercial vehicles. It connects to your PC via Bluetooth and allows you to perform various functions such as reading and clearing fault codes, live data, actuator tests, service reset, coding and programming.
If you have an old Autocom CDP+ BT with serial number 3555, you may wonder how to update and activate it for the latest software version. In this article, we will show you the steps to do that.
Step 1: Download and Install the Software
The first step is to download and install the software that matches your Autocom CDP+ BT device. The software version depends on the hardware key (HW key) of your device. You can find the HW key on the back label of your device or in the readme file that comes with the software.
For example, if your HW key is MNZTTOOCNHVE, you need to install the software with ID a-710-479 for cars or a-710-210 for trucks. You can download the software from the official website of Autocom or from other sources online. Make sure you download the correct version for your device.
After downloading the software, run the setup file and follow the instructions to install it on your PC. You may need to disable your antivirus or firewall during the installation process.
Step 2: Connect and Update Your Device
The next step is to connect your Autocom CDP+ BT device to your PC via Bluetooth. You need to pair your device with your PC first. To do that, go to the Bluetooth settings on your PC and search for new devices. You should see your Autocom CDP+ BT device with its serial number. Select it and enter the default password 1234 to pair it.
After pairing your device, you need to update its firmware to match the software version. To do that, open the Autocom software on your PC and go to the settings menu. Select \"Hardware setup\" and then \"Test\" to test your device connection. If everything is OK, you will see a green tick next to your device.
Then, select \"Update firmware\" and follow the instructions to update your device firmware. This may take a few minutes. Do not disconnect or turn off your device during the update process.
Step 3: Activate Your Software
The final step is to activate your software using a file activation method. To do that, you need to generate a FileActivation.xml file from your Autocom software and send it to someone who can activate it for you using a keygen.
To generate the FileActivation.xml file, open the Autocom software on your PC and go to the settings menu. Select \"Software activation\" and then \"Activate via USB\". You will see a message asking you to save a FileActivation.xml file on your desktop.
Save the file and then send it to someone who can activate it for you using a keygen. You can find someone who can do that online or contact your seller for help. The keygen is very expensive and not available for public use.
After receiving the activated FileActivation.xml file, copy it back to your desktop and overwrite the original one. Then, open the Autocom software again and go to the settings menu. Select \"Software activation\" and then \"Activate via USB\". You will see a message confirming that your software is activated.
That's how you can update and activate your old Autocom CDP+ BT with serial number 3555 for the latest software version. By following these steps, you can enjoy all the features and functions of this professional diagnostic tool. 061ffe29dd