How to Fix Ikon IK-780 Tab Stuck on Logo with SP5735 4.4.2 Firmware
If you have an Ikon IK-780 tablet that is stuck on the logo screen and does not boot up, you may need to flash it with the SP5735 4.4.2 firmware. This firmware can help you fix the hang on logo problem and restore your tablet to its normal functioning. In this article, we will show you how to download and install the Ikon IK-780 flash file tab SP5735 4.4.2 hang on logo fix firmware using a simple and easy method.
What is Ikon IK-780 Flash File Tab SP5735 4.4.2 Firmware
The Ikon IK-780 flash file tab SP5735 4.4.2 firmware is a software package that contains the operating system and other files for the Ikon IK-780 tablet. The firmware is stored in the internal memory of the tablet and can be updated or replaced using a computer and a USB cable. The firmware can also be used to fix various issues with the tablet, such as hang on logo, boot loop, software errors, virus infection, etc.
How to Download Ikon IK-780 Flash File Tab SP5735 4.4.2 Firmware
To download the Ikon IK-780 flash file tab SP5735 4.4.2 firmware, you need to follow these steps:
Visit the official website of Ikon and go to the support section.
Find your tablet model (IK-780) and click on it.
Select the firmware option and choose the SP5735 4.4.2 version.
Click on the download link and save the firmware file on your computer.
Alternatively, you can also use this direct link to download the Ikon IK-780 flash file tab SP5735 4.4.2 firmware: https://www.example.com/ikon-ik-780-flash-file-tab-sp5735-4-4-2-firmware.zip
How to Install Ikon IK-780 Flash File Tab SP5735 4.4.2 Firmware
To install the Ikon IK-780 flash file tab SP5735 4.4.2 firmware, you need to follow these steps:
Extract the downloaded firmware file on your computer using a zip extractor tool.
Install the USB drivers for your tablet on your computer from the extracted folder.
Download and install the SP Flash Tool on your computer from this link: https://www.example.com/sp-flash-tool.zip
Launch the SP Flash Tool and click on the scatter-loading button.
Browse and select the scatter file from the extracted firmware folder.
Make sure all the boxes are checked and click on the download button.
Turn off your tablet and connect it to your computer using a USB cable.
Wait for the flashing process to complete and disconnect your tablet from your computer.
Turn on your tablet and enjoy the new firmware.
Note: Flashing your tablet with this firmware will erase all your data and settings, so make sure you backup your important files before proceeding.
In this article, we have shown you how to fix your Ikon IK-780 tablet stuck on logo with the SP5735 4.4.2 firmware. We hope this article was helpful and informative for you. If you have any questions or suggestions, feel free to leave a comment below. 061ffe29dd